Roofing Supply
Complete roof systems, deck to ridge — matched to spec, consolidated in one shipment and delivered to job sites here at home and around the world.
Eight Product Lines
Everything the Roof Calls For
Order one line or the whole assembly. Every package is sourced to the specification and shipped with BAA / TAA documentation.
- 01
Low-Slope Membranes
Single-ply and multi-ply systems for flat and low-slope roofs on barracks, hangars, warehouses and administrative buildings — supplied as complete assemblies matched to the specified manufacturer warranty.
- TPO and PVC membrane, reinforced and fleece-back
- EPDM membrane, seam tape and primers
- SBS and APP modified bitumen cap and base sheets
- Bonding adhesives, walkway pads and accessories
- 02
Metal Roofing
Structural and architectural metal roof systems in the gauges, profiles and finishes your drawings call for, with the trim package and clips to close out the job.
- Mechanical and snap-lock standing seam panels
- Exposed-fastener R-panel and corrugated panels
- Ridge, rake, eave and custom-break trim
- Clips, closures, fasteners and sealant tape
- 03
Shingles & Underlayment
Steep-slope packages for housing and support buildings, from the deck protection up — shingles, underlayment and ventilation ordered together so nothing is missing on arrival.
- Architectural and high-wind rated shingles
- Hip and ridge caps, starter strips
- Synthetic and self-adhered ice-and-water underlayment
- Ridge vents, intake vents and drip edge
- 04
Insulation & Cover Board
Roof insulation to meet the specified R-value and slope-to-drain design, with the cover board and attachment the wind-uplift rating requires.
- Flat and tapered polyiso board
- Crickets, saddles and tapered edge strips
- Gypsum and high-density cover boards
- Insulation plates, fasteners and low-rise foam adhesive
- 05
Flashing & Fasteners
The details that make a roof watertight: perimeter edge metal, flashing and the fastening schedule, sourced to the same spec as the field of the roof.
- Coping, gravel stop and tested edge metal systems
- Pipe boots, curb and penetration flashing
- Roofing screws, plates and termination bar
- Sealants, mastics and pitch-pocket fillers
- 06
Coatings & Restoration
Fluid-applied systems that extend the life of an existing roof without a tear-off — often the fastest way to meet a maintenance contract in a remote location.
- Silicone and acrylic roof coatings
- Elastomeric base coats and primers
- Reinforcing fabric and seam sealers
- Cleaning and surface-prep products
- 07
Gutters & Drainage
Water management sized for tropical rainfall: gutters, conductor heads and drains supplied with the hangers and fittings to install them.
- Seamless and sectional gutters, hangers and end caps
- Downspouts, elbows and conductor heads
- Through-wall and overflow scuppers
- Primary and overflow roof drains
- 08
Typhoon-Rated Systems
Complete assemblies built to the uplift ratings Pacific island and coastal projects require — every component sourced to the tested system, so the rating holds on the finished roof.
- High-wind rated membrane and metal assemblies
- Enhanced fastening and perimeter attachment
- Uplift-rated edge metal and securement
- Documentation for the specified wind-uplift rating
How We Supply a Roof
One Order. One Shipment. One Team.
- STEP 01
Match the spec
Send the drawings, spec sections or takeoff. We price every component to the named manufacturer or an approved equal.
- STEP 02
Document compliance
BAA / TAA country-of-origin documentation assembled with the order, so the submittal is ready when the materials are.
- STEP 03
Consolidate
Membrane, insulation, metal, fasteners and accessories gathered into one shipment instead of a dozen deliveries.
- STEP 04
Deliver to the site
Delivered to your job site, whether it is across the state or across an ocean, with the paperwork your project requires.
Roofing Quotes
Send Us Your Roof Spec
We are here for all of your project supply needs.